Forensic Engineers and Consultants

Tag Archive: vehicle collision investigation

  1. “Introduction to Event Data Recorders (EDRs)” LIVE Webinar | October 22nd, 11am EDT

    Leave a Comment

    Accidents often have devastating consequences. Join WARREN’s Senior Collision Reconstructionist and President of S.C.A.R.S., South Carolina Association of Reconstruction Specialists, Aaron Duncan for an exclusive webinar on “Introduction to Event Data Recorders.”

    Learn from an expert how the information stored in this valuable tool can be utilized to help get to the truth of your loss.  Information like:

    • Change in Velocity
    • Vehicle Speed
    • Service Braking
    • Steering Angle
    • Safety Belt Usage
    • Seat Occupancy
    • Engine RPMs
    • Engine Trouble Codes
    • PLUS, many case studies to consider.

    Join us for this free, 45 minute + Q&A interactive webinar

    CREDITS AVAILABLE: 1.66 Credits for South Carolina CLE and 2 Credits for Georgia DOI.

    LIVE Interactive webinar. You don’t want miss this.

    Register Now, Seats are Limited

     

     

  2. Collision Reconstruction – Time Distance

    Leave a Comment

    A common car crash is when one vehicle makes a turn or pulls out in front of another vehicle. Normally, without the accident, the vehicles only cross paths for milliseconds. When the collision occurs it’s no doubt because both vehicles try to occupy the same space at the same moment. The question is often “who is at fault?”. (more…)

  3. Why Visit the Collision Scene?

    Leave a Comment

    If you are a collision investigator, a visit to the collision scene is something you want to do. No matter how much time has passed since the crash compared to the review of the case, the information that can be gleaned from walking through the area is valuable. We aren’t always given the option, but it is very beneficial, here is why. (more…)

  4. Belted or Unbelted? That is the Question!

    Leave a Comment

    Did the driver or passenger do what they could do to protect themselves by wearing their seatbelt? There are ways to determine if the safetybelt was being used. Most modern vehicles have a computer-controlled safety system that makes decisions based on an algorithm. That algorithm uses information such as change in speed and the direction of force to determine what to do. That data not only tells how fast the vehicle was traveling and if the brakes were applied, but also records the driver’s or passenger’s safetybelt status. (more…)

  5. Over the Hill

    Leave a Comment

    When traveling down the roadway, a lot of things must be considered. While things that can be seen are obvious concerns, things that cannot be seen pose a threat too. Blind hillcrests leave drivers guessing “what’s on the other side”. Regardless of their intentions, before drivers make a maneuver, they should pay extra attention to blind hill crests. In a collision that occurs just over a hillcrest, where one driver is attempting to continue straight as the other is attempting to make a left-hand turn, many times the investigating officer arrives at a common conclusion. Failure to yield right of way charges are often applied to the driver making the turn; however, are these charges applicable? (more…)

  6. The Pressure to Keep Rolling (Part 2)

    Leave a Comment

    One of the first safety concerns for your vehicle should be your tires. The tires on your vehicle or trailer maintain contact with the roadway and assist you in getting to your destination safely. So how do you know that your tires are proper for your vehicle, are being well-maintained, and beyond the obvious threat of tire failure, why is this important to know? (more…)

  7. Why investigators should have “Scaled Diagrams” of scenes?

    Leave a Comment

    When it comes to diagramming a crash scene, there are several methods to accomplish the task. Forensic Mapping, (locating, positioning, and documenting the evidence of a collision scene to scale) is essential to having the answers to the questions “Who, What, Where, When, and Why?”. Photographs do a great job showing what the investigators saw post collision; yet they lack scale and the ability to describe pre-collision movement. Having a computer aided diagram (CAD) of the collision scene goes much further than the pictures can; here is why.

    basic intersectionA scale diagram gives the full overview of a collision scene from either a 2D or 3D point of view. Being able to see how things lined up, how they came together and how they parted helps explain the events within a crash. When a scene can be viewed from top down or any angle, that helps relay the facts. The investigator, judge, or jury will get (more…)

  8. Piecing it Together…Traced Evidence

    Leave a Comment

    In the field of forensic investigations of traffic collisions, it can be repeated over and over that little things matter. It’s the details that align the facts to describe the event and answer the questions about the crash. Sometimes those details are simple, and they are often overlooked. The damage sustained by a vehicle involved in an accident tells a reconstructionist a lot. Your collision reconstruction could benefit from mapping the damage profiles of the involved vehicle(s) to assist in answering questions about the incident. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category