Forensic Engineers and Consultants

Tag Archive: suction tank

  1. Dig into Underground Fire Water Piping and Appurtenances

    Leave a Comment

    Many sites that are protected by fire sprinklers will have at least some amount of private underground fire water piping. Its purpose is to make water available for fire protection or suppression at a needed flow and pressure. Its presence is usually quietly evidenced by the connected objects that occasionally surface along its course, like valves, fire department connections and private hydrants, termed appurtenances. Underground water piping commands attention, though, when (more…)

  2. Dive Into Suction Tank Issues and Inspections

    Leave a Comment

    Privately-owned water tanks supplying fire protection systems have a long history. The NFPA published the Standard on Gravity Tanks in 1909. It is one of the oldest NFPA codes, predating even the Life Safety Code’s precursor, the Building Exits Code, first published in 1927. The Standard on Gravity Tanks evolved over the years to become NFPA 22, Standard for Water Tanks for Private Fire Protection. The inspection, testing, and maintenance requirements for all types of private fire water storage tanks are laid out in NFPA 25, Chapter 9 – Water Storage Tanks. While there are about eight different types of fire water tanks, I’d assert that the most common type today is the steel suction tank. (more…)

  3. A Primer On The Elements Of Fire Protection Water Supplies

    Leave a Comment

    Get primed!

    Fire protection water supplies can be made up of one or more common elements, including tanks, pumps, water sources and water systems. Sometimes elements are used together to develop an adequate supply for fire protection.

    An adequate water supply for a fire protection system will meet the needs of the fire protection system (plus safety factor) in three terms: (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category