Forensic Engineers and Consultants

Tag Archive: thomas kelly

  1. TVSS or SPD … Can I Buy a Vowel? Understanding Surge Protection and the Changing Requirements

    Leave a Comment

    Surge Protective Devices (SPD), formerly known as Transient Voltage Surge Suppressors (TVSS) have been around for a long time.   The most recognized version is integrated into outlet strips and used to protect sensitive electronics from surges, or higher than expected voltages on the power line.  Early versions of these surge strips were known to have problems where internal components could overheat and cause a fire.  Thermal protection was added to the designs to greatly reduce the potential for a fire hazard.  Such an implementation in an outlet strip is considered a Type 3 SPD. (more…)

  2. In a Flash – The Transfer of Energies in Our Global Electrical System

    Leave a Comment

    According to published weather data for the year 2019, 2.35 billion lightning strikes were recorded across the world, with 223 million of these in the United States.  The movement of atmosphere causes electrical charges to build up between clouds.  A tipping point is reached where the insulating properties of the air cannot withstand the level of energy and a discharge occurs.

    Image Credit: Charleston Post and Courier. A lightning strike over Charleston, SC on July 3, 2019.

    (more…)

  3. Testing…testing… Is this thing on?

    Leave a Comment

    Many people just take for granted that something is just going to work, and in many cases assume that it will work forever.  One such device that does not get enough attention is the Ground Fault Circuit Interrupter (GFCI).   Simply put, a GFCI is a protective device that compares the current flowing on the hot and neutral wires of the circuit and will “trip” to disconnect power to the circuit if a small imbalance of current is detected.  The imbalance of current is an indication of a dangerous alternate path for the current to flow from a damaged line cord or a fault inside an appliance and constitutes a shock hazard to a person. (more…)

  4. Ready, Set, Fly! – Understanding Another Technology for Forensic Investigations

    Leave a Comment

    This is the first blog in a series on integrating new technologies into the process of forensic investigations.  Documenting the scene of an incident accurately, efficiently, and safely is a key step in every investigation.  Busy roadways and unstable structures present hazards to the investigator during the investigation process. The use of remote sensors can reduce these risks and provide data that otherwise could not safely be obtained. (more…)

  5. Grounding versus Bonding – Understanding the Difference in Building Electrical Systems

    Leave a Comment

    While a teenager might be very familiar with being “grounded”, there is confusion over the meaning of the word in the electrical sense. In building electrical systems, “grounding” and “bonding” are two terms that are often misunderstood. Improper application of the concepts of grounding and bonding may create lethal shock and fire hazards. “Earthing” is a term which comes from the European International Electrotechnical Committee (IEC). Earthing is synonymous with grounding but often thought to have a different meaning. (more…)

  6. Electrical Engineer Joins Warren

    Leave a Comment

    Warren is pleased to announce the addition of Tom Kelly, MSEE, PE, CFEI, as Senior Consulting Engineer specializing in electrical equipment failures, electrocution and electric shock accidents, fires and explosions, industrial electrical accidents, lightning strike analysis, and scope of damage/estimate of repair. Tom also has experience in robotics and automation systems and high energy laser design. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category
Select Sub-Category (choose category first)
View Now