Forensic Engineers and Consultants

Tag Archive: expert witness

  1. Testing As Part of Gas Appliance Incident Investigation

    Leave a Comment

    Equipment and appliances supplied with fuel gases like natural gas, propane and butane are a common and convenient part of most of our lives.  Such devices as gas grills and ranges, ovens, furnaces, space heaters and water heaters usually perform without incident.  However, when they malfunction the potential for incidents such as fires and explosions, carbon monoxide (CO) poisoning and burn injuries may occur. These incidents may be due to design and manufacturing defects in the product, or improper installation or operation of the device.

    (more…)

  3. Graphitic Corrosion – Difficult to determine before a failure!

    Leave a Comment

    Graphitic corrosion is a process that may happen in equipment made of iron, particularly grey cast iron, but also ductile cast iron. Graphitic corrosion can lead to unexpected catastrophic failure of the affected part because the cast iron can lose its strength without a visible warning such as a change in size, shape, or appearance. (more…)

  5. Electrical Engineer Joins Warren

    Leave a Comment

    Warren is pleased to announce the addition of Tom Kelly, MSEE, PE, CFEI, as Senior Consulting Engineer specializing in electrical equipment failures, electrocution and electric shock accidents, fires and explosions, industrial electrical accidents, lightning strike analysis, and scope of damage/estimate of repair. Tom also has experience in robotics and automation systems and high energy laser design. (more…)

  6. Improper Design Leads to Fatigue Failure In Blower Shaft

    Leave a Comment

    A blower used to exhaust air from an industrial process stopped functioning when the blower wheel drive shaft fractured.  The process, and thereby most of the plant, had to operate at a reduced volume until the blower wheel could be replaced.  The blower wheel had been installed during a shutdown a week before the incident.  The blower wheel was a spare installed when the existing blower wheel was sent for scheduled remanufacturing. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category
Select Sub-Category (choose category first)
View Now