In the first blog in this series, we discussed the story behind the CE mark, the Machinery Directive, and the associated requirements regarding the design, production, and sale of machinery bearing the mark. The second blog discussed a cornerstone of safer machine design, the risk assessment. This installment will discuss another crucial piece of the safety puzzle, machine guard design. (more…)
In the previous blog (Part One) we discussed the backstory behind the two stylized letters CE and what it means to the design of machinery bearing the mark. We outlined some of the requirements of the “Machinery Directive” (MD) which include what are known as “Essential Health and Safety Requirements.” The Essential Health and Safety Requirements incorporate an iterative risk reduction process during design that takes into account (more…)
In my June 2015 blog, I discussed a personal injury case where the jury decided that the lack of interlocks on the covers of a swamp cooler did not render it defective, even though it was technologically feasible to do so and their existence would have prevented the amputation. Conversely, in another interesting personal injury case involving a computer numerically controlled (CNC) milling machine, a large settlement was made by the manufacturer with the injured operator because the machine did not have adequate interlocks on its enclosure doors. (more…)
An evaporative cooler, also known as a “swamp cooler”, is an air conditioner that works by evaporating water. A float valve keeps several inches of water in the bottom of the unit. A pump takes water from the pan to the top of a series of vertical pads made of absorbent materials like wood fibers. The water flows by gravity through the fiber pads. A fan pulls hot air from outside the house through the soaked pads. Water in the pads evaporates, cooling the air and increasing its humidity. The cooled and humidified air is blown back into the house. Evaporative coolers need to be cleaned periodically. (more…)
I recently finished working on a case where an operator received a right hand injury when an unguarded, rotating mixer shaft caught his gloved hand between the right index finger and middle finger, twisting it around the shaft causing the index finger to separate from the hand and the middle and ring finger to be dislocated. The mixer contained an unguarded rotating shaft, which created an uncontrolled motion hazard when rotating at speeds up to 450 RPM. (more…)
Not sure what you're looking for?
Browse All
