Forensic Engineers and Consultants

Tag Archive: expert

  1. The Role of Interlocking Guards in Injury Prevention

    Leave a Comment

    In the three-part series on the CE mark, we scratched the surface of some of the requirements an equipment manufacturer must meet in order to earn this designation. Part three of the series dealt with some of the requirements for the design of a guard.  One of the items for consideration with the design of a guard is the frequency that someone will need to access the area protected by the guard.  If access is needed on a routine basis, often defined as more than once per shift, the guard needs to be designed to be movable instead of fixed.  Movable is defined as able to be opened without the use of tools.  Otherwise the frustration and time requirements of obtaining tools and removing a fixed guard will often lead to the guard being discarded. (more…)

  2. The Paths of Chemical Exposure

    Leave a Comment

    The Safety Hierarchy states that hazards should be mitigated first by engineering controls, secondly by guarding, and lastly by warning/training.  When the first two, engineering controls and guards, fail in a manufacturing setting, a chemical release could occur. A forensic chemical engineer can help determine the root cause of that failure. (more…)

  3. What You May Not Know About Using a Concrete Test Hammer

    Leave a Comment

    When assessing potential problems in concrete structures, consider a non-destructive test using the concrete test hammer, AKA “rebound hammer,” before investing a lot of time and money needlessly replacing or destructively testing the concrete structure.  The use of rebound hammer tests should be considered before you or your client decide to drill multiple core samples. Large areas of the concrete structure suspected of having potential strength problems can be tested quickly with a rebound hammer.  Analysis of those results can narrow down specific areas for more rigorous testing. (more…)

  4. What’s Behind That CE Mark Part Three, Machine Guard Requirements

    Leave a Comment

    In the first blog in this series, we discussed the story behind the CE mark, the Machinery Directive, and the associated requirements regarding the design, production, and sale of machinery bearing the mark. The second blog discussed a cornerstone of safer machine design, the risk assessment. This installment will discuss another crucial piece of the safety puzzle, machine guard design. (more…)

  5. Load Holding Valves in Hydraulic Cranes

    Leave a Comment

    Hydraulic cranes absolutely rely on the integrity of their high-pressure fluid systems for safe operation.  A crane can become out of level when an outrigger cylinder leaks over time, possibly leading to a tip over.  A boom can collapse if a hydraulic hose ruptures.  It is not possible to absolutely prevent hydraulic cylinders from developing leaks or prevent hoses from rupturing during the life of a typical crane, therefore crane manufacturers provide load holding valves at key components to prevent these dangerous incidents.  In fact, ASME B30.5, Mobile and Locomotive Cranes, requires load holding valves or equivalent devices at outrigger cylinders, boom support cylinders, and boom telescoping cylinders. (more…)

  6. Working on the Waves While Working the Waves…

    Leave a Comment

    The rumors of my pending retirement have been greatly exaggerated…..

    Ever since I heard about The Great Loop I have wanted to cruise it (www.greatloop.org).  To successfully complete the Loop, one needs to have 3 things: adequate equipment, adequate time, and adequate health. I had the first and third.  To secure the second, I had floated the idea of a two-year sabbatical.  A year to complete any existing cases and a year to execute The Great Loop.

    With the arrival of COVID-19, our firm went to remote work. (more…)

  7. Ammonia – The Good, The Bad, The Smelly… Part Two

    Leave a Comment

    Now that you know what ammonia is (see Part One here), how it behaves, and how to safely store it and work with it, let’s look at some areas in industry where it is used.

    Anhydrous ammonia has a use in pollution control.  Industrial boilers and power plants burn coal or natural gas to make steam and/or electricity. When the fuel is burned using air as the oxygen source nitrogen gets exposed to the heat as well because air is 79% nitrogen.  The nitrogen gets oxidized and forms several compounds referred to as NOx (NO, NO2, NO3).  NOx compounds are harmful to (more…)

  8. The CE Mark and What Should It Mean to You? Part Two

    Leave a Comment

    In the previous blog (Part One) we discussed the backstory behind the two stylized letters CE and what it means to the design of machinery bearing the mark.   We outlined some of the requirements of the “Machinery Directive” (MD) which include what are known as “Essential Health and Safety Requirements.” The Essential Health and Safety Requirements incorporate an iterative risk reduction process during design that takes into account (more…)

  9. Construction Techniques to Prevent Water Penetration at Windows

    Leave a Comment

    Windows, and their interface with the exterior walls, are an important part of a building’s envelope that resists the intrusion of water. Most builders take many precautions to protect a house from water damage. One of the most important factors in keeping the water out is the installation of window flashing, a thin material that prevents water from seeping in around a window. (more…)

  10. Ammonia – The Good, The Bad, The Smelly… Part One

    Leave a Comment

    Ammonia is a compound consisting of one nitrogen atom and three hydrogen atoms and is denoted by the formula NH3. Its boiling point is -28°F at atmospheric pressure, so unless it is under pressure, it is gaseous at room temperatures. Therefore, pure ammonia is typically stored under pressure in a liquid form. Household ammonia is only 5-10% NH3, the remaining 90-95% is water. Ammonia is extremely soluble in water. It is often depicted  like this: (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category
Select Sub-Category (choose category first)
View Now