Forensic Engineers and Consultants

Tag Archive: fire expert assessment

  1. Stop or I’ll Soot!!!

    Leave a Comment

    Fire. Something about fire touches our brainstems…both good and bad!  Uncontrolled fire is terrifying and deadly to be sure.  But the controlled burning of wood at a campfire or in a fireplace in your home almost can’t be beat, to my mind! For that very reason, a fairly common amenity to houses nowadays is the gas log fireplace insert.

    When not installed properly, these logs will generate soot. These soot particles can leave the fireplace and meander.  All. Over. Your. House.  (more…)

  2. Testing As Part of Gas Appliance Incident Investigation

    Leave a Comment

    Equipment and appliances supplied with fuel gases like natural gas, propane and butane are a common and convenient part of most of our lives.  Such devices as gas grills and ranges, ovens, furnaces, space heaters and water heaters usually perform without incident.  However, when they malfunction the potential for incidents such as fires and explosions, carbon monoxide (CO) poisoning and burn injuries may occur. These incidents may be due to design and manufacturing defects in the product, or improper installation or operation of the device.

    (more…)

  3. Not Your Father’s House Fire

    Leave a Comment

    Remember the good old days when our homes were built with only lumber, dry-wall, and roofing?   Me neither.  However, we talk about ‘modern’ construction materials like this is a new phenomenon.  The truth is ‘modern’ construction materials started sneaking into homes over fifty years ago.  It’s not only construction materials that have changed: a century ago, we furnished our houses with wood, cloth, metal, and glass. Today, it’s plastics, foams, and coatings.

    (more…)

  4. New 2017 Edition of NFPA 921 Guide for Fire and Explosion Investigations

    Leave a Comment

    Over the course of its 25-year history, NFPA 921 Guide for Fire and Explosion Investigations has changed the practice of fire investigation for the better.  Without a doubt, NFPA 921 has appropriately driven a more rigorous approach to fire investigation that seeks to avoid cognitive bias and reliance on techniques that, when rigorously examined, are little more than pseudoscience.  One need look no further than the Cameron Todd Willingham matter, wherein a Texas man was executed in part based on a flawed fire investigation, to understand the importance of conducting a proper fire investigation. (more…)

  6. Analysis of Double Fatality Fire Allegedly Caused by a Portable Electric Heater

    Leave a Comment

    When fires occur, the effect on people’s lives is often devastating. This is especially true with fires that cause the death of a child. Clearly it is important to try and find the causes of such fires so that they can be prevented in the future. In such circumstances, it is especially important to follow a rigorous methodology in investigating the origin and cause of a fire. Investigators following a less than rigorous methodology may reach improper conclusions. Such was the case in a devastating fire investigated by Warren that was improperly alleged to have been caused by a supposedly defective product, a small electric space heater.
    (more…)

  7. Firefighter Burned Due to Improper Industrial Oven Design and Operation

    Leave a Comment

    Industrial ovens and furnaces are used in many manufacturing processes.  One use of industrial ovens is for drying and curing coatings on fabrics.

    We investigated a fire loss involving a very large oven, 10 stories high, used for curing coatings on an industrial fabric. A young firefighter was burned in response to this fire, one of a string of many fires that had occurred involving the oven.

    (more…)

  8. Evaluating the Potential for “Victim” Holes Not Caused By Lightning in CSST

    Leave a Comment

    One area that we have found particularly interesting are fires involving Corrugated Stainless Steel Tubing (CSST). CSST is a material used to plumb fuel gas inside structures.  It is used as an alternative to traditional black steel pipe or copper tubing. The stainless steel tube of CSST, in certain circumstances, will perforate when subjected to electrical arcing, including that due to local lightning strikes.  The escaping fuel gas from these perforations has obvious implications as to causing fires. (more…)

  9. Top Ten Photography Tips for Field Investigators

    Leave a Comment

    Here at Warren, we often rely on photographs provided by our clients to make preliminary assessments of incoming cases.  Since we see quite a few client provided photos, and since we take plenty of photographs ourselves, we’ve developed an eye for what makes a good and useful field investigation photograph.  We’ve also struggled with a few bad ones from time to time.  Good photographs always end up saving time and money.  To that end, here are ten tips to help you take better photographs every time. (more…)

  10. Container Handler Fire

    Leave a Comment

    Container handlers are mobile, rubber-tired, machines that are used to load and stack standard containers at a variety of shipping terminals.  The machines resemble oversized forklifts but are equipped with shipping container lift spreaders instead of forks.  The machines are often equipped with sophisticated computer systems that inform the operator which container needs to be lifted as well as its destination, whether it is a truck, train, or storage stack. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category
Select Sub-Category (choose category first)
View Now