Wouldn’t it be great to have a built-in camera to let you see exactly what went wrong before an incident? In many manufacturing instances there is, chemical plants especially. The computer system that operates the plant is called a Distributed Control System (DCS) and it has the capacity to monitor thousands of process variables (flow rates, temperatures, pressures, levels, valve positions, pumps on/off) simultaneously. (more…)
The thirty-thousand-foot view of manufacturing is raw material in, alter in an appropriate fashion, finished product out, by-product out. Since the finished product keeps a business in business, it gets the most attention. What about by-products or waste streams? (more…)
Understanding the structural load path is imperative when considering renovations in a home that may require the removal of a load-bearing wall. Some homeowners consider adding a new door or window opening and worry if the structure will collapse. Another reason could be that the owner wants an open concept floor plan. The goal is to remove walls and open their living space. (more…)
One of my more interesting calls and subsequent forensic investigations was regarding water accumulating inside of 2X4 fluorescent light fixtures in a suspended ceiling of a secondary school in South Carolina.
The client called and indicated that the metal chassis of the lights were sweating and generating enough water to accumulate on the diffuser lens of the lights. Obviously, an on-site investigation was in order! (more…)
Hail property damage is frequently reported after an HVAC service call. Building owners are often unaware there is damage until the power bill starts trending higher and the HVAC system is simply not cooling effectively. Take look at the fins! The National Weather Service reported over $722 million in property damage from hail in 2018. Based on NWS data, hail caused more property damage than tornadoes or thunderstorms. Only Tropical Storms/Hurricanes at $12 billion, coastal storms at $1 billion and flooding at $1 billion were more costly than hail to property.
One of the items very susceptible to damage is the HVAC system. The heat that is removed from the interior of a building must be rejected to the environment. As such the HVAC system is placed where it can have unhindered access to outdoor air in order to function properly. This often results in the unit being placed in a large open space such as a rooftop, making it susceptible to damage such as hail. (more…)
A wall is really boring until it fails. A retaining wall is supposed to hold back soil to either support a structure or keep a space clear. When it fails, both of those roles are compromised. A retaining wall does not have to collapse to fail. In fact, a failure is perhaps better defined as when the wall does not perform as expected. (more…)
The Occupational Health and Safety Administration (OSHA) “Top 10 for 2018” violations once again have Machine Safeguarding earning a position on the list. Machine safeguarding was the 9th most cited standard as noted in the list below:
(Source: www.osha.gov/Top_Ten_Standards.html)
A mini-excavator at a job site developed a leak at a hydraulic fitting at the base of the cylinder that raises and lowers the boom. A subcontractor foreman at the site raised the boom to search for the leak. The foreman found and attempted to tighten the leaking fitting. When he did, the fitting separated from the base of the cylinder, releasing the hydraulic pressure that held the boom aloft. The boom fell and the bucket struck a nearby superintendent for the general contractor.
Equipment and appliances supplied with fuel gases like natural gas, propane and butane are a common and convenient part of most of our lives. Such devices as gas grills and ranges, ovens, furnaces, space heaters and water heaters usually perform without incident. However, when they malfunction the potential for incidents such as fires and explosions, carbon monoxide (CO) poisoning and burn injuries may occur. These incidents may be due to design and manufacturing defects in the product, or improper installation or operation of the device.
When it comes to diagramming a crash scene, there are several methods to accomplish the task. Forensic Mapping, (locating, positioning, and documenting the evidence of a collision scene to scale) is essential to having the answers to the questions “Who, What, Where, When, and Why?”. Photographs do a great job showing what the investigators saw post collision; yet they lack scale and the ability to describe pre-collision movement. Having a computer aided diagram (CAD) of the collision scene goes much further than the pictures can; here is why.
A scale diagram gives the full overview of a collision scene from either a 2D or 3D point of view. Being able to see how things lined up, how they came together and how they parted helps explain the events within a crash. When a scene can be viewed from top down or any angle, that helps relay the facts. The investigator, judge, or jury will get (more…)
Not sure what you're looking for?
Browse All
