Forensic Engineers and Consultants

Tag Archive: forensic investigation

  1. Children Will Fall At Playgrounds. What Shall We Do To Protect Them? A Multipart Blog Series – Part II: A Brief Summary of Playground Safety Standards

    Leave a Comment

    Welcome to the second part in our multipart blog series examining a young boy’s fall and injury at a public playground. If you missed the first part in this series, click www.warrenforensics.com/2017/10/11/children-will-fall-at-playgrounds-what-shall-we-do-to-protect-them-a-multipart-blog-series-part-i/ to read it. In this post, we will highlight some resources that designers of public playgrounds can use to help ensure their designs are reasonably safe. (more…)

  2. Children Will Fall At Playgrounds. What Shall We Do To Protect Them? A Multipart Blog Series – Part I

    Leave a Comment

    A 5-year old boy was severely injured at a public playground when he fell through a second floor opening around a fireman’s pole in a playhouse. He fell more than seven feet and struck a bare concrete floor. We are thankful that he eventually recovered from his injuries. The person who designed and built the playground was accused of negligence. A lawsuit ensued, and eventually settled in favor of the boy. (more…)

  3. The Impact of Technology on Slip and Fall Incidents

    Leave a Comment

    I have investigated hundreds of slip and fall incidents in my career. Today, we have new tools and technology available to assist investigators in conducting forensic investigations to determine the cause or causes of these incidents and to assist owners and operators in loss preventions efforts to minimize the potential of slip and fall incidents. (more…)

  4. Injury Involving a Capstan Winch

    Leave a Comment

    A capstan winch uses a mechanically powered rotating cylinder, called a capstan, to apply pulling force through a rope. When the rope is looped around the rotating capstan and tightened, friction between the rope and capstan allows the winch to apply force to pull a load. A typical capstan winch is shown in Figure 1 below. (more…)

  5. Timber – Falling Beam Strikes Worker

    Leave a Comment

    As an experienced safety consultant, I have investigated many serious injuries and deaths at construction sites over the past 39 years. The United States Department of Labor reports that the fatal injury rate for the construction industry is highest of all industries in the nation. Out of 4,386 worker fatalities in private industry in calendar year 2014, 899 or 20.5% were in construction i.e., one in five worker deaths were in construction. (more…)

  6. Painting of Handicap Ramps

    Leave a Comment

    As an experienced safety consultant, I’m called on to investigate a wide range of premises liability incidents. One common premises liability incident that often results in serious injury is a fall on a handicap ramp. There are at least four types of handicap ramps – flare side, parallel, returned curb and built-up. (more…)

  7. Another Dimension of Engineering, Part 2: Visual Demonstrations Can Clarify the Issue

    Leave a Comment

    In our last post on 3D scanning, we introduced Warren’s new Faro Focus X 330 three dimensional scanner.  To recap, the Faro scanner combines three dimensional laser measurement with automated photography to capture 360-degree data from the real world. Potential applications include vehicle accident scenes and damaged vehicles, structural collapses, fire scenes, flood damage scenes, and machinery and equipment analysis, among others. In this post, we will highlight some of the outputs that can be created from the detailed data captured by the scanner. (more…)

  8. A Steep Price: Improperly sloped curb ramps increase the potential of serious pedestrian injury

    Leave a Comment

    As an experienced safety consultant, I’m called to investigate a wide range of premises liability incidents. One common premises incident that often results in serious injury is a fall on a curb ramp. There are at least four types of curb ramps: flare side, parallel, returned curb and built-up. This post will focus primarily on flare side curb ramps which are the most common type constructed today. (more…)

  9. Warren Adds Another Dimension of Engineering

    Leave a Comment

    We at Warren are pleased to announce our recent purchase of a Faro Focus X 330 three dimensional scanner with FARO Scene image processing software. The scanner takes up to 976,000 data points per second and can scan objects at distances to 1000 feet.  The scanner forms a point cloud of millions of data points while also capturing 360 degree panoramic photographs.  By combining a series of scans, a three dimensional representation can be created that enables precise measurements, animations, and demonstrations. The scanner can capture imagery indoors, outdoors, and even in darkness. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category