Forensic Engineers and Consultants

Tag Archive: Industrial Machine Guard

  1. Machine Guarding and Risk Assessment

    Leave a Comment

    The Occupational Health and Safety Administration (OSHA) “Top 10 for 2018” violations once again have Machine Safeguarding earning a position on the list. Machine safeguarding was the 9th most cited standard as noted in the list below:

    1. Fall protection, construction (29 CFR 1926.501)
    2. Hazard communication standard, general industry (29 CFR 1910.1200)
    3. Scaffolding, general requirements, construction (29 CFR 1926.451)
    4. Respiratory protection, general industry (29 CFR 1910.134)
    5. Control of hazardous energy (lockout/tagout), general industry (29 CFR 1910.147)
    6. Ladders, construction (29 CFR 1926.1053)]
    7. Powered industrial trucks, general industry (29 CFR 1910.178)
    8. Fall Protection–Training Requirements (29 CFR 1926.503
    9. Machinery and Machine Guarding, general requirements (29 CFR 1910.212)
    10. Eye and Face Protection (29 CFR 1926.102)

    (Source: www.osha.gov/Top_Ten_Standards.html)

    (more…)

  2. Unguarded Shear Point on Force Tester Amputates Worker’s Finger

    Leave a Comment

    A worker was injured while testing gas springs similar to the type that hold the hatchback of an SUV open. The hazard that injured the worker was an unguarded shear point. The tester contained a mounting plate that was raised and lowered by a pneumatic cylinder.

    The pneumatic cylinder lowered the mounting plate while the worker’s fingers were in the hazardous, unguarded shear point. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category