Forensic Engineers and Consultants

Tag Archive: Industrial product safety

  1. Interpreting Industrial Incident Data – Lesson Learned

    Leave a Comment

    This is a case study about an incident I investigated involving a major upset in a distillation column.  This blog builds on the previous blogs about the Distributed Control System, DCS – Data is the Key.

    Distillation is a method of separating mixtures of compounds with differing boiling points.  Uncle Bill with his still on the hill separates ethanol, that boils at 173°F, from water that boils at 212°F.  If the mixture is heated to above 173°F, but below 212°F, the ethanol will boil, the vapor will travel up out of the unit and then can be condensed and served over ice with an olive…   Any mixture of two or more chemicals with different boiling points can be separated in this way.  The distillation (more…)

  2. WARREN WEBINAR: Property Claims Issues at Manufacturing Facilities

    Leave a Comment

    LIVE WEBINAR: “Property Claims Issues at Manufacturing Facilities” | Presented by WARREN’s President and Senior Consulting Engineer, Jennifer Morningstar, P.E., CFEI.

    COURSE LEARNING OBJECTIVES
    The learning objectives of this course are to provide the attendees with information on the four major facets of property claims that are commonplace in manufacturing facilities.

    They are:

    1. Subrogation against third parties;
    2. Boiler & machinery vs property claims;
    3. Scope of loss, and
    4. Business interruption

    Each facet will be explored and exemplified by at least one case study.

    (more…)

  3. The Role of Interlocking Guards in Injury Prevention

    Leave a Comment

    In the three-part series on the CE mark, we scratched the surface of some of the requirements an equipment manufacturer must meet in order to earn this designation. Part three of the series dealt with some of the requirements for the design of a guard.  One of the items for consideration with the design of a guard is the frequency that someone will need to access the area protected by the guard.  If access is needed on a routine basis, often defined as more than once per shift, the guard needs to be designed to be movable instead of fixed.  Movable is defined as able to be opened without the use of tools.  Otherwise the frustration and time requirements of obtaining tools and removing a fixed guard will often lead to the guard being discarded. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category
Select Sub-Category (choose category first)
View Now