Forensic Engineers and Consultants

Tag Archive: scope of damage

  1. Warren Welcomes Fire Protection Engineer Amy Anderson, P.E.

    Leave a Comment

    Please join us in welcoming Fire Protection Engineer Amy Anderson, P.E., to the WARREN family! Amy has over 20 years of property loss prevention engineering and experience, specializing in fire protection. Amy graduated from Clemson University with a degree in Chemical Engineering and is a licensed Professional Engineer in Fire Protection.

    Amy’s Expertise Includes: (more…)

  2. WARREN WEBINAR: Property Claims Issues at Manufacturing Facilities

    Leave a Comment

    LIVE WEBINAR: “Property Claims Issues at Manufacturing Facilities” | Presented by WARREN’s President and Senior Consulting Engineer, Jennifer Morningstar, P.E., CFEI.

    COURSE LEARNING OBJECTIVES
    The learning objectives of this course are to provide the attendees with information on the four major facets of property claims that are commonplace in manufacturing facilities.

    They are:

    1. Subrogation against third parties;
    2. Boiler & machinery vs property claims;
    3. Scope of loss, and
    4. Business interruption

    Each facet will be explored and exemplified by at least one case study.

    (more…)

  3. Water Damage from Leaking Shower Stalls

    Leave a Comment

    Have you ever had to have a leaking shower pan for a tiled shower stall replaced, only to have a recurrence a few years later? If so, it is likely that it was not properly built and/or repaired. In most installations, the shower stall is constructed with an underlying one-piece flexible membrane of PVC that is attached to the wall studs before the backer board and wall tile is installed. No nails or screws should penetrate the membrane below the level of the curb of the shower stall. The only opening in the membrane below the curb must be the hole for the shower drain to connect to the house plumbing. The shower drain is designed to allow water on top of the membrane to flow into the drain via weep holes for that purpose. (more…)

  4. Chemical Engineers: More than Glorified Plumbers – Really!

    Leave a Comment

    As a senior at Virginia Tech, I was told that ChemE’s were little more than glorified plumbers.  Looking back, I’m pretty sure it was to keep our geek-egos in check. It was an effective tool! However, as I grew and traveled as a professional, it became an effective descriptor; applying to a larger scale and using a modifier or two for specific applications.  So, if you have a loss that falls into one of the categories below, a ChemE could be the expert you need. (more…)

  5. Electrical Engineer Joins Warren

    Leave a Comment

    Warren is pleased to announce the addition of Tom Kelly, MSEE, PE, CFEI, as Senior Consulting Engineer specializing in electrical equipment failures, electrocution and electric shock accidents, fires and explosions, industrial electrical accidents, lightning strike analysis, and scope of damage/estimate of repair. Tom also has experience in robotics and automation systems and high energy laser design. (more…)

  6. Another Dimension of Engineering, Part 2: Visual Demonstrations Can Clarify the Issue

    Leave a Comment

    In our last post on 3D scanning, we introduced Warren’s new Faro Focus X 330 three dimensional scanner.  To recap, the Faro scanner combines three dimensional laser measurement with automated photography to capture 360-degree data from the real world. Potential applications include vehicle accident scenes and damaged vehicles, structural collapses, fire scenes, flood damage scenes, and machinery and equipment analysis, among others. In this post, we will highlight some of the outputs that can be created from the detailed data captured by the scanner. (more…)

  7. Warren Adds Another Dimension of Engineering

    Leave a Comment

    We at Warren are pleased to announce our recent purchase of a Faro Focus X 330 three dimensional scanner with FARO Scene image processing software. The scanner takes up to 976,000 data points per second and can scan objects at distances to 1000 feet.  The scanner forms a point cloud of millions of data points while also capturing 360 degree panoramic photographs.  By combining a series of scans, a three dimensional representation can be created that enables precise measurements, animations, and demonstrations. The scanner can capture imagery indoors, outdoors, and even in darkness. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category