Forensic Engineers and Consultants

Tag Archive: Professional Chemical Engineer

  1. Interpreting Industrial Incident Data – Lesson Learned

    Leave a Comment

    This is a case study about an incident I investigated involving a major upset in a distillation column.  This blog builds on the previous blogs about the Distributed Control System, DCS – Data is the Key.

    Distillation is a method of separating mixtures of compounds with differing boiling points.  Uncle Bill with his still on the hill separates ethanol, that boils at 173°F, from water that boils at 212°F.  If the mixture is heated to above 173°F, but below 212°F, the ethanol will boil, the vapor will travel up out of the unit and then can be condensed and served over ice with an olive…   Any mixture of two or more chemicals with different boiling points can be separated in this way.  The distillation (more…)

  2. P&ID’s, If You Please – Piping and Instrumentation Diagrams Explained

    Leave a Comment

    When investigating an industrial incident, one piece of information I always ask for is the relevant P&ID’s for the process.  P&ID stands for Piping and Instrumentation Diagram and is defined as “A schematic diagram of the relationship between instruments, controllers, piping, and system equipment.” A set of P&ID’s for an entire facility allows you to trace the entire manufacturing process from raw material unloading to finished product loadout, including utilities like steam, water, fuel, and air. That’s great information to have, but isn’t especially useful (more…)

  3. The Paths of Chemical Exposure

    Leave a Comment

    The Safety Hierarchy states that hazards should be mitigated first by engineering controls, secondly by guarding, and lastly by warning/training.  When the first two, engineering controls and guards, fail in a manufacturing setting, a chemical release could occur. A forensic chemical engineer can help determine the root cause of that failure. (more…)

  4. Ammonia – The Good, The Bad, The Smelly… Part One

    Leave a Comment

    Ammonia is a compound consisting of one nitrogen atom and three hydrogen atoms and is denoted by the formula NH3. Its boiling point is -28°F at atmospheric pressure, so unless it is under pressure, it is gaseous at room temperatures. Therefore, pure ammonia is typically stored under pressure in a liquid form. Household ammonia is only 5-10% NH3, the remaining 90-95% is water. Ammonia is extremely soluble in water. It is often depicted  like this: (more…)

  5. Not Your Father’s House Fire

    Leave a Comment

    Remember the good old days when our homes were built with only lumber, dry-wall, and roofing?   Me neither.  However, we talk about ‘modern’ construction materials like this is a new phenomenon.  The truth is ‘modern’ construction materials started sneaking into homes over fifty years ago.  It’s not only construction materials that have changed: a century ago, we furnished our houses with wood, cloth, metal, and glass. Today, it’s plastics, foams, and coatings.

    (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category
Select Sub-Category (choose category first)
View Now