Forensic Engineers and Consultants

Tag Archive: risk assessment

  1. Danger Within Reach

    Leave a Comment

    How far away from a hazard should you stay?  Your parents or grandparents would probably have told you to stay far away, but what are you to do when a hazard is present, and you must work around or near the hazard?  And what exactly is a hazard?  ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction defines a hazard as a “potential source of harm.

    Where would a designer of a machine or product start if they wished to protect the user from a known hazard?  Consensus standards are a great place to begin the quest for safety. (more…)

  2. HEY…Cover Up Please!

    Leave a Comment

    Machine guards can be compared to the clothes we wear every day.  Indeed, they serve a very important purpose.  Imagine someone leaving their home on a fine, sunny morning wearing nothing but a smile.  Wonder how far they will get through the day before things start going poorly for this individual?

     

     

     

     

     

    There will be more than a few raised eyebrows and blushes when he stops into the local Starbucks for his usual morning double-dipped and whipped, chocolaty chip with a touch of pumpkin spice cappuccino fix.  Good luck with that!  Probably going to leave disappointed, empty-handed, and likely wearing handcuffs.  This will be the beginning of a very long, very bad day for that individual.  Had he recognized the risks associated with this type of behavior, and then put forth a little effort to cover up, he would have prevented many unfavorable and possibly life-changing personal and legal problems from ever occurring!

    And so it is with properly guarding a machine.  Machine safeguarding helps to protect workers from preventable injuries. (more…)

  3. WARREN Welcomes Mechanical Engineer Bob Hickman, P.E.

    Leave a Comment

    Please join us in welcoming Mechanical Engineer Bob Hickman, P.E., to the WARREN family! Bob has over 30 years of manufacturing and machine design experience in production and quality-driven environments. Bob holds a Bachelor of Science in Mechanical Engineering from Clemson University.

    Bob’s Areas of Expertise Include:
    -Machine Safeguarding
    -Machine Design
    -Equipment Failure
    -Mechanical Engineering
    -Industrial Accident Investigation
    -Codes & Standards
    -Machinery & Equipment Damage Assessment
    -Products Liability (more…)

  4. The Concepts of Hazard, Risk, and Harm in Machine Safeguarding

    Leave a Comment

    Hazard, risk, and harm are terms that are used in the world of machine safeguarding.   How do these words shape the concept of machine safeguarding? Let’s look a little deeper….

    Hazard, which Merriam-Webster defines as a noun, lists its first meaning as a source of danger.

    1: a source of danger

    2athe effect of unpredictable and unanalyzable forces in determining events CHANCERISK

      b:  a chance event ACCIDENT  (more…)

  5. Conveyor Backstops: Sometimes One Isn’t Enough, Part 2

    Leave a Comment

    This is the second in a two-part blog series about conveying equipment that severely injured a worker at a mine. In case you missed it, click here to read Part 1 where I describe the incident and the mining equipment. In this part, I will discuss my engineering analysis of the incident and the machinery involved and share the conclusions I reached.

    The injured miner was a front-end loader operator. He was not a maintenance worker. He simply responded to a radio request for help with the conveyor. Power to the electric conveyor motors was locked out, but none of the maintenance workers did anything to lock out or block the hazardous gravitational potential energy in the heavy load of stone on the belt. (more…)

  6. Conveyor Backstops: Sometimes One Isn’t Enough, Part 1

    Leave a Comment

    This is the first of a two-part blog series describing an incident involving conveying machinery that seriously injured a miner. Part 1 describes the machinery and the incident. In Part 2 I will summarize my engineering analysis of the incident and share the conclusions I reached.

    A loaded, inclined conveyor belt may contain hazardous levels of energy due to gravity. To protect workers, anti-reverse devices called backstops are installed on inclined conveyors to prevent unexpected downhill movement. The Conveyor Equipment Manufacturer’s Association (CEMA) defines a backstop as: (more…)

  7. Unguarded Shear Point on Force Tester Amputates Worker’s Finger

    Leave a Comment

    A worker was injured while testing gas springs similar to the type that hold the hatchback of an SUV open. The hazard that injured the worker was an unguarded shear point. The tester contained a mounting plate that was raised and lowered by a pneumatic cylinder.

    The pneumatic cylinder lowered the mounting plate while the worker’s fingers were in the hazardous, unguarded shear point. (more…)

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category