Forensic Engineers and Consultants

Archive: Subrogation

How Long Before the Pipes Freeze?

Author

An unexpected severe winter freeze will remind many people and businesses that when water in a pipe freezes, the ice will expand and burst the pipe or pipe fitting.  Large losses will result from flooding when the temperatures rise.  Insulation will help, but not prevent freezing.  Insulation simply slows down the rate of heat loss.  The time of exposure to subfreezing temperature is an important factor.

The American Society of Refrigeration and Air Conditioning Engineers (ASHRAE) Handbook of Fundamentals has a short entry on the topic (Chapter 23, page 23.5-6), which gives an equation for estimating the time that it will take an insulated pipe to freeze, Read More

Industrial Equipment Failures and Construction Disputes

Author

At Warren, we frequently investigate losses involving industrial machinery.  Many of the losses involve workplace injuries, fires, or explosions; however, we also analyze industrial machinery and processes for other types of problems.  For example, we analyze failures of machinery or industrial processes to perform as expected or disputes that arise from the commercial supply and construction of such systems.  This can encompass a range of issues from failure to achieve required levels of product quality or production quantity, to matters concerning unclear specifications or contracts, Read More

Interpreting Industrial Incident Data – Lesson Learned

Author

This is a case study about an incident I investigated involving a major upset in a distillation column.  This blog builds on the previous blogs about the Distributed Control System, DCS – Data is the Key.

Distillation is a method of separating mixtures of compounds with differing boiling points.  Uncle Bill with his still on the hill separates ethanol, that boils at 173°F, from water that boils at 212°F.  If the mixture is heated to above 173°F, but below 212°F, the ethanol will boil, the vapor will travel up out of the unit and then can be condensed and served over ice with an olive…   Any mixture of two or more chemicals with different boiling points can be separated in this way.  The distillation Read More

WARREN WEBINAR: Property Claims Issues at Manufacturing Facilities

Author

LIVE WEBINAR: “Property Claims Issues at Manufacturing Facilities” | Presented by WARREN’s President and Senior Consulting Engineer, Jennifer Morningstar, P.E., CFEI.

COURSE LEARNING OBJECTIVES
The learning objectives of this course are to provide the attendees with information on the four major facets of property claims that are commonplace in manufacturing facilities.

They are:

  1. Subrogation against third parties;
  2. Boiler & machinery vs property claims;
  3. Scope of loss, and
  4. Business interruption

Each facet will be explored and exemplified by at least one case study.

Read More

Heat Exchanger Failures Will Shut Your Process Down

Author

Heat exchangers, as the name implies, are used to bring a process stream to a desired temperature.  They can heat or cool either gases or liquids. They are fairly intricate in their construction, therefore not the cheapest piece of equipment to purchase.  For that reason, facilities don’t keep “spare” exchangers lying around, so when they fail catastrophically, the entire manufacturing process goes down with them… and stays down until they are fixed or replaced. Ow!

Read More

Heating System Losses, Part One

Author

When fall and winter arrive and temperatures drop, it is a great comfort to have a heating system to warm your home or office. Several categories of heating equipment exist to provide both primary and secondary heating. Primary heating systems include fuel gas/fuel oil/electric forced air furnaces, heat pumps, hydronic heating/steam systems and even wood-fired heating systems.  Secondary heating equipment includes electric, gas and kerosene space heaters of both fixed and portable design, and fireplaces. Each of the different types of heating systems have unique hazards that, uncontrolled, can result in fires, explosions, burn injuries, and carbon monoxide poisoning.  Read More

P&ID’s, If You Please – Piping and Instrumentation Diagrams Explained

Author

When investigating an industrial incident, one piece of information I always ask for is the relevant P&ID’s for the process.  P&ID stands for Piping and Instrumentation Diagram and is defined as “A schematic diagram of the relationship between instruments, controllers, piping, and system equipment.” A set of P&ID’s for an entire facility allows you to trace the entire manufacturing process from raw material unloading to finished product loadout, including utilities like steam, water, fuel, and air. That’s great information to have, but isn’t especially useful Read More

The Role of Interlocking Guards in Injury Prevention

Author

In the three-part series on the CE mark, we scratched the surface of some of the requirements an equipment manufacturer must meet in order to earn this designation. Part three of the series dealt with some of the requirements for the design of a guard.  One of the items for consideration with the design of a guard is the frequency that someone will need to access the area protected by the guard.  If access is needed on a routine basis, often defined as more than once per shift, the guard needs to be designed to be movable instead of fixed.  Movable is defined as able to be opened without the use of tools.  Otherwise the frustration and time requirements of obtaining tools and removing a fixed guard will often lead to the guard being discarded. Read More

The Paths of Chemical Exposure

Author

The Safety Hierarchy states that hazards should be mitigated first by engineering controls, secondly by guarding, and lastly by warning/training.  When the first two, engineering controls and guards, fail in a manufacturing setting, a chemical release could occur. A forensic chemical engineer can help determine the root cause of that failure. Read More

Don’t Get Burned With Your Gas Grill!

Author

If there is one thing Americans can agree upon, it is the enjoyment that comes from an outdoor barbeque.  Whether a summertime cookout or a fall BBQ to watch a football game, we all love the fun and fellowship that comes from sharing a meal that was prepared outdoors on a grill or smoker.  In fact, 64% of Americans own a grill or smoker.  The great majority of these are LP fueled gas grills with comparatively few natural gas fired grills.  These products can be enjoyed safely when designed, installed, and used in a proper manner.  However, given the grill’s use of flammable fuel gas and high temperatures, the potential exists for things to go wrong and result in burn injuries or uncontained fires that spread to the surroundings. Read More

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category
Select Sub-Category (choose category first)
View Now