Forensic Engineers and Consultants

Category Archive: Safety and Design

A Steep Price: Improperly sloped curb ramps increase the potential of serious pedestrian injury

As an experienced safety consultant, I’m called to investigate a wide range of premises liability incidents. One common premises incident that often results in serious injury is a fall on a curb ramp. There are at least four types of curb ramps: flare side, parallel, returned curb and built-up. This post will focus primarily on flare side curb ramps which are the most common type constructed today. Read More

Why Should I be Concerned About Galvanic Corrosion?

Author

It is fairly common knowledge that the use of dissimilar metals in plumbing systems can quickly result in a leak due to a corroded pipe or fitting. Read More

Who is Responsible for a “Booby Trap” Opening on a Roof Top? Part 3

As an experienced safety consultant, I have investigated many incidents in my career in which a worker “falls through an opening.”  The majority of these incidents have occurred at construction sites and most resulted in serious injury or death. Read More

Uninvited House Guests: Mold and Other Fungal Growths

Author

The wet, relatively warm weather recently experienced in the southeast has caused a high incidence of mold and other fungal growth complaints in homes and other structures.  Engineers at Warren are often called upon to investigate the cause(s) of these problems. Read More

Not Falling for Your Job?

Periodically, Warren Engineers and Consultants are asked to perform inspections that require work at raised elevations. Typical jobs and tasks include climbing on commercial and residential roofs with steep pitches, working on scaffolding, climbing from one level to the next at a fire or industrial loss scene, riding in the buckets of lift equipment, and inspecting exterior structural elements such as windows and masonry.  Read More

Flood Damage to Electrical Equipment

Author

As a result of the recent weather, those of us in South Carolina have gained a renewed appreciation of the damage that can result from flooding. Even a few inches of flood water can result in property damage and a loss of services in addition to the immediate risk of physical harm. Read More

Manufacturer Settles with Operator Injured by a Flying Tool Fragment from Milling Machine

In my June 2015 blog, I discussed a personal injury case where the jury decided that the lack of interlocks on the covers of a swamp cooler did not render it defective, even though it was technologically feasible to do so and their existence would have prevented the amputation.  Conversely, in another interesting personal injury case involving a computer numerically controlled (CNC) milling machine, a large settlement was made by the manufacturer with the injured operator because the machine did not have adequate interlocks on its enclosure doors. Read More

Air Conditioning Evaporators

Author

This is the third and final of three articles concerning the basics of air conditioning systems.  This article concerns the evaporator, a part of the air conditioning system that is usually unseen inside the air handling unit. The evaporator, in concert with a fan, supplies cool air to a building interior. Read More

Firefighter Burned Due to Improper Industrial Oven Design and Operation

Author

Industrial ovens and furnaces are used in many manufacturing processes.  One use of industrial ovens is for drying and curing coatings on fabrics.

We investigated a fire loss involving a very large oven, 10 stories high, used for curing coatings on an industrial fabric. A young firefighter was burned in response to this fire, one of a string of many fires that had occurred involving the oven.

Read More

Air Conditioning Condensing Units

Author

The condensing unit is a key component of all vapor compression air conditioning systems.  We are all familiar with condensing units as the noisy exterior portions of air conditioning systems that blow hot air to the environment. Read More

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category