Forensic Engineers and Consultants

Blog Posts by: Warren Team

Don’t Get Burned With Your Gas Grill!

Author

If there is one thing Americans can agree upon, it is the enjoyment that comes from an outdoor barbeque.  Whether a summertime cookout or a fall BBQ to watch a football game, we all love the fun and fellowship that comes from sharing a meal that was prepared outdoors on a grill or smoker.  In fact, 64% of Americans own a grill or smoker.  The great majority of these are LP fueled gas grills with comparatively few natural gas fired grills.  These products can be enjoyed safely when designed, installed, and used in a proper manner.  However, given the grill’s use of flammable fuel gas and high temperatures, the potential exists for things to go wrong and result in burn injuries or uncontained fires that spread to the surroundings. Read More

What You May Not Know About Using a Concrete Test Hammer

Author

When assessing potential problems in concrete structures, consider a non-destructive test using the concrete test hammer, AKA “rebound hammer,” before investing a lot of time and money needlessly replacing or destructively testing the concrete structure.  The use of rebound hammer tests should be considered before you or your client decide to drill multiple core samples. Large areas of the concrete structure suspected of having potential strength problems can be tested quickly with a rebound hammer.  Analysis of those results can narrow down specific areas for more rigorous testing. Read More

Construction Techniques to Prevent Water Penetration at Windows

Author

Windows, and their interface with the exterior walls, are an important part of a building’s envelope that resists the intrusion of water. Most builders take many precautions to protect a house from water damage. One of the most important factors in keeping the water out is the installation of window flashing, a thin material that prevents water from seeping in around a window. Read More

Shedding Some Light on Fluorescent Light Fixture Fires

Author

Lighting systems in buildings and other structures have undergone changes over the years.  Many of these changes have occurred as manufacturers have developed more efficient lighting methods.  Lighting loads can represent the largest category of electrical load in many buildings, thus improved lighting efficiency may significantly lower your power bill and can lengthen time between lamp changes. Read More

Why the Structural Load Path MUST be Considered During Renovation to Prevent Property Damage

Author

Understanding the structural load path is imperative when considering renovations in a home that may require the removal of a load-bearing wall. Some homeowners consider adding a new door or window opening and worry if the structure will collapse. Another reason could be that the owner wants an open concept floor plan. The goal is to remove walls and open their living space. Read More

When the Walls Come Tumbling Down… Retaining Wall Basics

Author

A wall is really boring until it fails. A retaining wall is supposed to hold back soil to either support a structure or keep a space clear. When it fails, both of those roles are compromised. A retaining wall does not have to collapse to fail. In fact, a failure is perhaps better defined as when the wall does not perform as expected. Read More

Testing As Part of Gas Appliance Incident Investigation

Author

Equipment and appliances supplied with fuel gases like natural gas, propane and butane are a common and convenient part of most of our lives.  Such devices as gas grills and ranges, ovens, furnaces, space heaters and water heaters usually perform without incident.  However, when they malfunction the potential for incidents such as fires and explosions, carbon monoxide (CO) poisoning and burn injuries may occur. These incidents may be due to design and manufacturing defects in the product, or improper installation or operation of the device.

Read More

Why investigators should have “Scaled Diagrams” of scenes?

Author

When it comes to diagramming a crash scene, there are several methods to accomplish the task. Forensic Mapping, (locating, positioning, and documenting the evidence of a collision scene to scale) is essential to having the answers to the questions “Who, What, Where, When, and Why?”. Photographs do a great job showing what the investigators saw post collision; yet they lack scale and the ability to describe pre-collision movement. Having a computer aided diagram (CAD) of the collision scene goes much further than the pictures can; here is why.

basic intersectionA scale diagram gives the full overview of a collision scene from either a 2D or 3D point of view. Being able to see how things lined up, how they came together and how they parted helps explain the events within a crash. When a scene can be viewed from top down or any angle, that helps relay the facts. The investigator, judge, or jury will get Read More

Danger Lurking in the Hot Tub

Author

Several dangers involving the use of a hot tub (spa) may readily come to mind, such as the risk of shock or electrocution, or the risk of drowning for unsupervised young children.  Not so readily apparent is the effect of overheating the human body, or “hyperthermia”.

Some individuals are more susceptible to the effects of hyperthermia, including the elderly, young children, and those in poor health.  The effects of hyperthermia, or overheating of the human body, cause direct responses such as headache, nausea, heat exhaustion, increased cardiac output, lethargy, confusion, heat stroke and unconsciousness.  The onset of hyperthermia is defined as being at 99.5° F; if the body temperature reaches 104° F, a life-threatening medical emergency exists.  Read More

Water Damage from Leaking Shower Stalls

Author

Have you ever had to have a leaking shower pan for a tiled shower stall replaced, only to have a recurrence a few years later? If so, it is likely that it was not properly built and/or repaired. In most installations, the shower stall is constructed with an underlying one-piece flexible membrane of PVC that is attached to the wall studs before the backer board and wall tile is installed. No nails or screws should penetrate the membrane below the level of the curb of the shower stall. The only opening in the membrane below the curb must be the hole for the shower drain to connect to the house plumbing. The shower drain is designed to allow water on top of the membrane to flow into the drain via weep holes for that purpose. Read More

Type ofLoss

Not sure what you're looking for?
Browse All

Select Loss Category
Select Sub-Category (choose category first)
View Now